ALEX MARKETPLACE - Badges and Medals of German - Page 16

Badges and Medals of German

Showing 241–256 of 315 results

Filters
  • Panzer Assault Badge in Silver “25” – C.E. Juncker

    Panzer Assault Badge in Silver “25” – C.E. Juncker (Lot: 585)

    Fine zinc, semi-hollow construction; the tank finished in a lighter tone; the tank section riveted to the wreath with two aluminum rivets; the wreath silver-plated; reverse fitted with a round non-magnetic pin, the pin plate soldered in place. Heavily worn; the badge was wartime-repaired on the reverse. Condition: 2–3.

    Panzer Assault Badges with engagement numbers manufactured by Juncker are extremely rare. By order of 22 June 1943, the Army High Command approved the introduction of Panzer Assault Badges with engagement numbers. The newly established grade structure was as follows:
    1st grade: Panzer Assault Badge
    2nd grade: Panzer Assault Badge with number 25
    3rd grade: Panzer Assault Badge with number 50
    4th grade: Panzer Assault Badge with number 75
    5th grade: Panzer Assault Badge with number 100

    $ 2,950 fee: 22.5%
  • Eastern Front Medal 1941/42 (Ostmedaille), with maker.

    Eastern Front Medal 1941/42 (Ostmedaille), with maker. (Lot: 568)

    Original Eastern Front Medal 1941/42 with the maker’s mark stamped on the suspension ring. Produced in zinc with a well-preserved dark patina and traces of the original silver wash along the rim. The eagle motif and all inscriptions remain clear and sharp, showing no signs of cleaning or restoration.

    The ribbon is bright, with the correct wartime weave and colour tone, mounted on the original marked ring. Overall condition is excellent for a zinc Ostmedaille: even patina, strong relief, and a fully authentic, untouched set.

    $ 150 fee: 22.5%
  • Kuban Shield (Kubanschild), 1943

    Kuban Shield (Kubanschild), 1943 (Lot: 560)

    Original Kuban Shield. Complete with its period-correct construction: felt backing, internal paper layer, and folded prongs on the reverse.

    Sharp relief throughout — including the eagle, the “1943” date, “KUBAN”, “LAGUNEN”, and the sector names “KRYMSKAJA” and “NOWOROSSIJSK”. Attractive untouched patina, no restoration. Fully original piece.

    $ 490 fee: 22.5%
  • Luftwaffe Ground Assault Badge

    Luftwaffe Ground Assault Badge (Lot: 559)

    Original Luftwaffe Ground Assault Badge, two-piece type with a separately applied eagle. The wreath is made of nickel silver with an even dark patina, and the lightning bolt shows crisp detail. The golden-toned eagle is fixed with separate posts and displays slight movement — a known and typical feature of genuine early assembled examples.

    Fully functional hardware: tubular hinge, long pin, and solid catch. No restoration, attractive original finish with natural aging.

    $ 400 fee: 22.5%
  • Iron Cross 1st Class, 1939 pattern, screw-back version. Marked L/13 (Paul Meybauer, Berlin).

    Iron Cross 1st Class, 1939 pattern, screw-back version. Marked L/13 (Paul Meybauer, Berlin). (Lot: 554)

    Original screw-back Iron Cross 1st Class with L/13 maker mark on the reverse. Three-piece construction with magnetic iron core, black lacquer finish, and silvered frame. Rare screw-back variant complete with its original base plate and nut. Reverse is stamped L/13, indicating the manufacturer Paul Meybauer, Berlin. Attractive patina, all parts original, no restoration.

    $ 600 fee: 22.5%
  • Minesweeper Badge, Third Reich.

    Minesweeper Badge, Third Reich. (Lot: 553)

    Original early-type Minesweeper Badge made of tombac, featuring a gilt oak-leaf wreath and silvered mine-explosion plume above stylised waves. The reverse bears the correct maker marks:
    “FEC. OTTO PLACZEK BERLIN” and
    “AUSF. SCHWERIN BERLIN”.

    Typical Schwerin hardware: solid block hinge, broad long pin, and classic catch construction. Condition is very good for age — attractive patina, honest wear to the edges, and partially preserved gilding on the wreath. No cleaning, all finishes are original.

    A desirable early tombac example by Schwerin, considered one of the most collectible makers of this award.

    $ 550 fee: 22.5%
  • Three-Place Medal Bar (1957 Federal Republic of Germany Issue)

    Three-Place Medal Bar (1957 Federal Republic of Germany Issue) (Lot: 516)

    A post-war medal bar assembled in accordance with the 1957 German law permitting veterans to wear “denazified” versions of wartime decorations, redesigned without prohibited symbols. The bar includes:
    1. Iron Cross 2nd Class, 1957 Issue (Eisernes Kreuz 2. Klasse, 1957 pattern) — redesigned without the swastika, featuring oak leaves in the center. Nickel-plated frame, black core, original red-white-black ribbon.
    2. War Merit Cross 2nd Class with Swords, 1957 Issue (Kriegsverdienstkreuz 2. Klasse mit Schwertern, 1957 pattern) — denazified version in bronze finish, original ribbon.
    3. Wehrmacht Long Service Medal, 4th Class, 1957 Issue (Wehrmacht Dienstauszeichnung 4. Klasse, 1957 pattern) — silvered medal with the legal FRG design, on the correct blue ribbon.

    The bar is hand-assembled on red backing with a long, full-length pin typical for post-war construction. Excellent condition with minimal wear.

    $ 175 fee: 22.5%
  • German WestWall Medal with original packet and ribbon.

    German WestWall Medal with original packet and ribbon. (Lot: 491)

    Oval medal with dark-silver finish and sharp relief; reverse marked “Für Arbeit zum Schutze Deutschlands”. Includes original ribbon and maker-marked paper packet (Schworzin & Cie, Graz-Eggenberg). Good collectible condition.

    Auction Ended
    SOLD for $ 120
  • Tyrolean Commemorative Medal 1914–1918 (Österreichische Tiroler Denkmünze)

    Tyrolean Commemorative Medal 1914–1918 (Österreichische Tiroler Denkmünze) (Lot: 470)

    Original Tyrolean Medal, issued in Austria to honor the resistance of Tyrolean militia and local citizens during World War I.

    Details:
    • Era: World War I, 1914–1918
    • Material: Bronze
    • Diameter: Approx. 33 mm
    • Obverse: Features the Austrian imperial eagle
    • Reverse: (Can provide photo if needed)
    • Ribbon: Original triangular red and white ribbon with green edging
    • Condition: Good vintage condition with some signs of age (see photos)

    This medal holds historical and collectible value—a great addition to any collection of Austrian or military memorabilia.

    $ 50 fee: 22.5%
  • Medal for the Prussian-Danish War of 1863–64. Original. Bronze

    Medal for the Prussian-Danish War of 1863–64. Original. Bronze (Lot: 469)

    Offered here is a rare and authentic medal awarded for participation in the Prussian-Danish War of 1863–64, instituted by King Wilhelm I of Prussia on September 20, 1864. This medal was awarded to soldiers of Prussia and allied states who took part in military actions against Denmark.

    Description:
    • Material: Bronze
    • Diameter: approx. 29 mm
    • Obverse: Profile portrait of King Wilhelm I with surrounding inscription
    • Reverse: Inscription “Für Tapferkeit im Kriege 1864” (“For Bravery in War 1864”) within a laurel wreath
    • Ribbon: Original (black-white-red), minor signs of age possible
    • Condition: Excellent for its age, clear details, beautiful patina, no damage

    A rare historical artifact of interest to collectors and researchers of 19th-century German military history.

    $ 90 fee: 22.5%
  • VDA Fundraising Badge – Volksbund für das Deutschtum im Ausland, ca. 1930s

    VDA Fundraising Badge – Volksbund für das Deutschtum im Ausland, ca. 1930s (Lot: 418)

    Original tin and paper donation badge of the VDA (Association for Germans Abroad), issued during charitable fundraising campaigns to support ethnic Germans outside the Reich. Blue printed flower design with “VDA” inscription. Pin-back fastener to reverse. Typical late-1930s construction (paper-on-tin with lacquer finish).

    $ 15 fee: 22.5%
  • “Gautag Westfalen-Süd Bochum 1938” Regional Party Day Badge

    “Gautag Westfalen-Süd Bochum 1938” Regional Party Day Badge (Lot: 417)

    Original commemorative badge issued for the 10th Anniversary of the NSDAP District “Westfalen-Süd,” held in Bochum from May 27–29, 1938. Obverse features a large eagle with wreath and swastika, inscription GAUTAG 10 Jahre Westfalen-Süd. Reverse maker-marked Pleuger & Voss, Lüdenscheid. Die-struck zinc alloy with pin-back fastening. Very good condition with light age patina.

    $ 60 fee: 22.5%
  • “Reichsparteitag 1936” NSDAP Rally Badge

    “Reichsparteitag 1936” NSDAP Rally Badge (Lot: 416)

    Original German commemorative badge issued for the 1936 NSDAP Party Rally in Nuremberg. Die-struck zinc alloy with pin-back fastening. The obverse depicts three figures holding shields and sword, symbolizing the unity of Party, People, and Army, with the imperial eagle and swastika above, dated 1936. Inscribed REICHSPARTEITAG below. Reverse maker-marked B.H. Mayer, Pforzheim. Very good condition with light age patina.

    $ 45 fee: 22.5%

Sold at Blitz price

  • Steel Helmet [M17] Camo WWI

    Steel Helmet [M17] Camo WWI (Lot: 1495)

    Excellent overall condition on this helmet. Features a standard camo pattern with colors of brown, green ad dark yellows. No dents and heavy damage, just expected wear for a helmet of this age. Interior is even better with all three liner pads intact which is quite rare as the tend to rot and fall out. Has a size stamping to the one side which is faint, but can just make it out. Nice WWI helmet with a great look about it.

    Auction Ended
    Product sold for blitz price: $ 1,595
  • Officer sword of Third Reich [FW. Höller]. With an additional eagle on the back of the grip

    Officer sword of Third Reich [FW. Höller]. With an additional eagle on the back of the grip (Lot: 1472)

    Officer parade weapons, revived following the restoration of the German armed forces, continued the proud traditions of the Imperial Army and the Reichswehr. Unlike the Army dagger model 1935, officer sabers were produced in numerous design variations by various Solingen manufacturers. Production of this type of weapon was discontinued in May 1943 due to wartime industrial demands; however, examples already in service continued to be worn with parade uniforms. In late 1944, the wearing of parade edged weapons was completely abolished, and officers were ordered to carry a pistol instead of a saber or dagger.

    The blade bears the mark of the renowned Solingen firm F. W. Höller Waffenfabrik, founded in 1866 and officially registered with the Solingen authorities on 5 June 1883. From its founding, the company specialized in the production of edged weapons and cutlery. Throughout the late 19th century and during the First World War, the firm manufactured a wide range of military products, including bayonets, sabers, and swords. In 1905, the company registered its well-known trademarks: the thermometer image, as well as the figure of a man tipping his hat with the inscription “Hut ab!” (“Hats off!”). From 1914 to 1939, the firm was managed by Julius Küller. During the Third Reich period, Höller became one of the largest and most prolific edged weapons manufacturers in Solingen, specializing in a broad range of military products. In 1935, the company was located at Sonnenstraße 8, Solingen, and that same year received RZM license M7/33. Products were actively advertised in specialized journals and catalogs, showcasing an extensive assortment that included NSDAP and Wehrmacht daggers, swords, and bayonets. The firm also produced parade bayonets with high-quality etched blades. In 1941, Höller celebrated its 75th anniversary, promoting the Höller Model 21 sword as its flagship model. In June 1941, the company was assigned the K98 bayonet manufacturer letter code (fze). Following the end of the Second World War, under the ownership of Herr Grah, the firm continued operations, producing cutlery, kitchen and professional knives, swords, and scissors through the 1970s. The company was officially liquidated in December 1974. Particular collector value is added to this example by a rare decorative detail: an additional eagle on the grip backstrap, distinguishing this saber from standard production specimens.

    Auction Ended
    Product sold for blitz price: $ 5,395
  • SA Service Dagger (Early type). [Stöcker & Co. SMF]. Rarity 6/10

    SA Service Dagger (Early type). [Stöcker & Co. SMF]. Rarity 6/10 (Lot: 1465)

    A service edged weapon of the SA (Sturmabteilung) storm troopers, adopted in 1933. The distinctively shaped blade with double-sided sharpening bears the legendary motto “Alles für Deutschland.” The handle is made of brown-colored wood and decorated with the SA emblem featuring an eagle; the metal scabbard is finished in the same brown tone.

    The early type of SA/NSKK daggers was produced between 1933 and 1936 and is distinguished by a number of characteristic design features. The scabbard and handle fittings are made of nickel silver (German silver), which, combined with the high quality of component fitting and the anodized scabbard coating, sets these examples apart from later production runs. This dagger was manufactured by Stöcker & Co. SMF. Early examples are particularly prized by collectors due to their impeccable craftsmanship and historical significance as the first service daggers of the storm troopers.

    A rarity rating of 5 out of 10 according to the Ralf Siegert classification indicates that such examples are relatively uncommon on the antiques market.

    Auction Ended
    Product sold for blitz price: $ 2,525
  • Imperial German Navy Officer’s Sword [E. & F. Horster]. Marine Corps (Seebataillon)

    Imperial German Navy Officer’s Sword [E. & F. Horster]. Marine Corps (Seebataillon) (Lot: 1468)

    The naval saber was a mandatory attribute of the dress uniform of officers in the Kaiserliche Marine. During the period of Kaiser’s Germany, the imperial anchor beneath the Kaiser’s crown was characteristic in the design of the hilt. The classical variant featured a brass hilt, ivory grip, and a lion’s head with eyes of red and green color. The scabbard was typically made of black leather with brass fittings; steel scabbards are considerably rarer. Sabers were purchased by officers at their own expense, which resulted in numerous variations of execution. Standard and Damascus blades can be found, various hilt designs and decorative scabbard finishes, as well as several sizes ranging from light and elegant to large Grosse Pattern models. It is precisely this diversity of execution that makes naval sabers a particularly interesting independent field of collecting: collections can be built according to manufacturers, sizes, hilt types, blades, and finishing variations. Along with the dirk, the saber remained a symbol of officer status and the continuity of German naval weaponry traditions of the nineteenth century.

    E. & F. Hörster, one of the largest Solingen manufacturers of naval edged weapons, operated from the nineteenth century and continued production during the Weimar Republic and the Third Reich. The firm produced high-quality naval sabers and dirks in various execution variants. Already before World War I, Hörster products were supplied not only for the German market but were also exported to other European countries, including the Russian Empire. Thanks to its long operational period, Hörster products allow one to trace the development of naval edged weapons from the Kaiser era to the Kriegsmarine.

    Seebataillone represented naval infantry units of the Kaiserliche Marine. There were several marine battalions, and the custom-made edged weapons associated with them constitute a separate field of collecting German naval weaponry. A characteristic feature of such items is the combination of naval and infantry attributes. For example, an officer’s saber could feature a traditional naval hilt and blade but be equipped with steel infantry-type scabbards. Custom specimens frequently bear personal dedications from one officer to another or from the officer corps to a specific serviceman of a Seebataillon. In addition to officer sabers and other custom edged weapons, this group includes infantry-type bayonets for Mauser system rifles with Seebataillone designations and symbols. Most such items bear unit designations; however, named specimens also occur, representing particular collecting interest.

    This saber features a characteristic openwork pierced hilt, presented in the catalogs of several manufacturers; however, it did not correspond to the established standard for Kaiserliche Marine edged weapons and was subsequently prohibited from being worn. It is precisely this unusual feature that makes such sabers particularly desirable among collectors today. Such specimens were predominantly ordered as presentation weapons, for example upon an officer’s transfer to another unit or upon his retirement from service, and served as an object of special pride for the owner. The present specimen is entirely original; the factory riveting of the hilt remains intact, the saber has not been disassembled, and retains its original configuration.