• AlexMP GTD

  

  Mauser rifle bayonet (1934-1945). 1941 – cul 41. [E.Pack & S]. Unsharpened blade. Matching numbers. (Lot: 1389)

  The S84/98 bayonet is one of the most recognizable symbols of the German soldier during World War II. Representing a further development of the earlier S84/98 model, it was adopted as the standard bayonet for the Mauser Karabiner 98k carbine and was mass-produced by the German weapons industry. Due to its widespread use, this bayonet remained in service with the Wehrmacht throughout World War II and today represents one of the most popular collecting areas for German edged weapons.

  The “cul 41” marking indicates that the bayonet was manufactured in 1941 at the E. Pack & Sohn factory (E.Pack & S marking) in Solingen, where the letters “cul” represent the military manufacturer’s code assigned under the system for concealing German weapons enterprises. This period is characterized by mass production of K98k bayonets for Wehrmacht needs during the expansion of military operations on the Eastern Front.

  The blade of this example was never sharpened, which is of particular value to collectors as it indicates minimal combat use or warehouse storage of the item. The absence of resharpening marks preserves the original blade geometry, significantly increasing the collectible value of the specimen.

  Matching numbers on the blade and scabbard confirm their original pairing from the time of manufacture. Such examples are encountered considerably less frequently due to combat losses and postwar reassembly; therefore, they command higher collectible value among collectors of German edged weapons.

  $ 745 fee: 22.5%
• AlexMP GTD

  

  Mauser rifle bayonet (1934-1945). 1940 – cvl 40 WKC 40. [WKC]. Unsharpened blade. (Lot: 1388)

  The legendary S84/98 bayonet is one of the most recognizable symbols of the German soldier during World War II. Representing a further development of the earlier S84/98 model, it was adopted as the standard bayonet for the Mauser Karabiner 98k carbine and was mass-produced by the German weapons industry. Due to its widespread distribution, this bayonet remained in service with the Wehrmacht throughout World War II and today represents one of the most popular areas of German edged weapons collecting.

  This 1940-dated example is of particular interest from an attribution standpoint. WKC bayonets from this period are characterized by the existence of two marking variants: early in the year, blades were produced with the traditional WKC company trademark; however, the manufacturer later transitioned to the letter code “cvl,” introduced as part of a system of anonymous manufacturer designations aimed at limiting the identification of military contractors. Thus, both variants date to 1940 and reflect a transitional period in the marking system of the German weapons industry, presenting additional interest for collectors.

  The manufacturer WKC (Weyersberg, Kirschbaum & Cie) is rightfully considered one of the oldest and most prestigious weapons manufacturers in Solingen. Founded in 1883 through the merger of two renowned workshops, the company was the largest supplier of bayonets to the German army from the late 19th century onward, producing a wide range of models from Mauser rifle bayonets to dress examples.

  The collectible appeal of this example is substantially enhanced by the fact that the blade was never sharpened. Bayonets with unsharpened blades are of particular value to collectors, as they indicate minimal combat use or depot storage of the item. The absence of resharpening marks preserves the original blade geometry, which significantly increases the collectible value of the specimen.

  $ 245 fee: 22.5%
• AlexMP GTD

  

  Mauser rifle bayonet (1934-1945). 1943 – ffc 43. [F. Herder A Sn]. Unsharpened blade. (Lot: 1387)

  The S84/98 bayonet is one of the most recognizable symbols of the German soldier during the Second World War. Representing a further development of the earlier S84/98 model, it was adopted as the standard bayonet for the Mauser Karabiner 98k carbine and was mass-produced by the German arms industry. Due to its widespread use, this bayonet remained in service with the Wehrmacht throughout the Second World War and today represents one of the most popular collecting areas for German edged weapons.

  The “ffc 43” marking indicates that the bayonet was manufactured in 1943 at the Friedrich Herder Abr. Sohn factory in Solingen, which operated under a code designation within the Third Reich’s military secrecy system. This period is characterized by mass production of K98k bayonets for Wehrmacht requirements under conditions of total war. The “ffc” stamp belongs to the three-letter production codes introduced by the German military authority to conceal information about the locations of defense enterprises.

  F. Herder A. Sn. (full name Friedr. Herder Abraham Sohn) is a renowned German cutlery manufactory from Solingen, founded in 1727. The company was one of the largest edged weapons manufacturers in Germany, fulfilling state contracts for bayonet production for the Prussian and subsequently the German army.

  The blade of this example has not been sharpened, which is of particular value to collectors as it indicates minimal combat use or warehouse storage. The absence of resharpening marks preserves the original blade geometry, substantially increasing the collectible value of the specimen.

  $ 245 fee: 22.5%
• AlexMP GTD

  

  Mauser rifle bayonet (1934-1945). [Unidentified manufacturer]. Unsharpened blade. (Lot: 1386)

  Model 1884/98 bayonet for the Mauser K98k carbine, complete with metal scabbard. The handle features Bakelite grips with characteristic checkering. The blade is single-edged with a fuller; the ricasso bears serial number 9259 and the letter code ‘k’. The pommel displays Wehrmacht military acceptance stamps WaA253 and WaA268. The metal scabbard has a ball-shaped tip, with markings on the throat including the ‘1937’ production year designation. The bayonet is in good collectible condition with age-appropriate patina.

  $ 225 fee: 22.5%
• AlexMP GTD

  

  Mauser rifle bayonet (1934-1945). 1942 – ddl 42. [Jos Corts]. (Lot: 1385)

  A true “calling card” of the German soldier during World War II, this bayonet represents a modernized variant of the S84/98 model, created specifically for use with the Mauser Gewehr 98 rifle. Mass-produced by the German weapons industry, it remained in service with the Wehrmacht throughout the entire period of World War II.

  The “ddl 42” marking on the blade definitively identifies this bayonet as a 1942 production item, manufactured at the Jos Corts facility in Solingen. This production code belongs to the coding system used by German military enterprises during World War II. Bayonets bearing this marking were produced for arming K98k carbines and represent significant collecting interest as examples of mass military production of the Third Reich.

  The Jos Corts company was located in Solingen, the traditional center of German blade manufacturing with centuries of history. The company specialized in the production of edged weapons and bayonets, supplying products for the needs of the German army in the late 19th and first half of the 20th century. The “Jos Corts” marking is found on bayonets of various models, including bayonets for Mauser rifles, and is considered relatively rare among collectors, which adds additional appeal to this particular example.

  $ 195 fee: 22.5%
• AlexMP GTD

  

  Mauser rifle bayonet (1934-1945). 1943 – fnj 43. Non-matching numbers. (Lot: 1384)

  A legendary “calling card” of the German soldier during World War II, this is a modernized variant of the S84/98 bayonet, created specifically for the famous Mauser Gewehr 98 rifle. This edged weapon was mass-produced by the German arms industry and remained in service with the Wehrmacht throughout the entire period of World War II.

  The marking “fnj 43” on the blade indicates that the bayonet was manufactured in 1943 at the Alexander Coppel GmbH factory located in Solingen. The letter code “fnj” served as the secret designation for the enterprise within the Wehrmacht coding system, which in itself is of interest to military history researchers. This period is characterized by the mass production of K98k bayonets for the needs of the Eastern Front, where the demand for weapons was particularly acute. It should be noted that the serial numbers on the bayonet’s components do not match, indicating assembly from parts of different origins (a practice characteristic of wartime production) and lending the specimen additional collector’s uniqueness.

  $ 195 fee: 22.5%
• AlexMP GTD

  

  Mauser rifle bayonet (1934-1945). Non-matching numbers. (Lot: 1383)

  Model 1884/98 bayonet for the Mauser 98k rifle, complete with metal scabbard. The grip is fitted with walnut wood scales, secured by two screws. The blade ricasso bears the manufacturer’s mark “crs” (E. & F. Hörster, Solingen). The pommel is stamped with the acceptance mark “25u”. The scabbard is engraved with the regimental marking “J.R.14” (14th Infantry Regiment), indicating the bayonet’s assignment to a specific Wehrmacht military unit. The single-edged blade features a characteristic fuller and retains its original polish.

  Auction Ended
  Product sold for blitz price: $ 195
• AlexMP GTD

  

  German Sword, pre-1918 Cavalry. Lion head [M. Neumann Berlin] Family Coat of Arms. Damascus steel, etching, gilding. (Lot: 1382)

  Cavalry edged weapons of the German Empire were intended for officers and enlisted men of dragoon, cuirassier, uhlan, hussar, and other cavalry regiments, remaining in service until the end of the First World War in 1918. This category includes sabers, pallasches, and other examples of bladed weapons that formed an integral part of German cavalry equipment. The presented German saber, dating to before 1918, serves as an excellent example of officer armament from the Imperial period.

  The most distinctive feature of many officer cavalry sabers is the pommel in the form of a lion’s head, one of the most recognizable symbols of German edged weapons from the Imperial period. This model gained widespread use in German armies of the 19th century, particularly among cavalry and infantry officers, and to this day remains a desirable acquisition for serious collectors.

  The firm M. Neumann, Berlin was a German supplier of military equipment and edged weapons in the late 19th and early 20th centuries. The enterprise was located in Berlin and supplied sabers, pallasches, bayonets, and other military items for the German army, earning a reputation as a reliable manufacturer of quality officer weapons.

  A coat of arms on the blade or hilt of a German saber indicates that the weapon belonged to a member of a noble house or aristocratic family. Such examples were made to individual order and were frequently embellished with a motto, initials, or a crown of the appropriate rank. The presence of a family coat of arms significantly enhances the historical and collectible value of the piece, as in certain cases it allows identification of the specific owner and tracing of the weapon’s provenance.

  The blade is forged from Damascus steel and decorated with ornamental etching and gilding. This combination of materials and techniques is characteristic of the most prestigious examples of ceremonial and presentation edged weapons, making this specimen particularly attractive to discerning connoisseurs of German military antiques.

  $ 7,895 fee: 22.5%

Sold at Blitz price